How to camp outTents, Tent Poles and Pins
(Page 12 of 13)
TENT-PINS.
Tent-pins should be made of sound hard wood; old wheel-spokes are excellent. Make them pointed at the bottom, so that they will drive easily; and notch them about two inches from the top, so that they will hold the rope. Cut away the wood from just above the notch towards the back of the head; this will prevent the notch of the pin from splitting off when it is driven. It is well to have pins differ in length and size: those for the corners and the stays should be the largest, say fifteen to eighteen inches long; and those for the wall and door may be eight or ten inches. But pins of these sizes are apt to pull out in a heavy storm; and so when you are to camp in one spot for some time, or when you see a storm brewing, it is well to make pins very stout, and two feet or more long, for the stays and four corner guy-lines, out of such stuff as you find at hand.
Loosen the pins by striking them on all four sides before you try to pull them up. A spade is a fine thing to use to pry out a pin that is deep in the ground, and a wooden mallet is better than an axe or hatchet to drive them in with; but, unless you have a large number of pins to drive, it will hardly pay you to get a mallet especially for this business.
Make a stout canvas bag to hold the tent-pins; and do not fold them loose with the tent, as it soils and wears out the cloth.